feat: 改进安装脚本的交互体验和自动化流程

- 修复 curl | bash 管道模式下无法交互式输入的问题
  - 使用 /dev/tty 检测终端可用性替代 stdin 检测
  - 所有 read 命令从 /dev/tty 读取用户输入
- 安装完成后自动启动服务和启用开机自启
- 使用 ipinfo.io API 获取公网 IP 用于显示访问地址
- 简化安装完成后的输出信息

.gitignore

@@ -91,4 +91,5 @@ backend/data/
 # ===================
 tests
 CLAUDE.md
-.claude
+.claude
+scripts

backend/internal/pkg/sysutil/restart.go

@@ -1,43 +1,39 @@
 package sysutil
 
 import (
-	"fmt"
 	"log"
-	"os/exec"
+	"os"
 	"runtime"
+	"time"
 )
 
-const serviceName = "sub2api"
+// RestartService triggers a service restart by gracefully exiting.
-
-// RestartService triggers a service restart via systemd.
 //
-// IMPORTANT: This function initiates the restart and returns immediately.
+// This relies on systemd's Restart=always configuration to automatically
-// The actual restart happens asynchronously - the current process will be killed
+// restart the service after it exits. This is the industry-standard approach:
-// by systemd and a new process will be started.
+//   - Simple and reliable
-//
+//   - No sudo permissions needed
-// We use Start() instead of Run() because:
+//   - No complex process management
-//   - systemctl restart will kill the current process first
+//   - Leverages systemd's native restart capability
-//   - Run() waits for completion, but the process dies before completion
-//   - Start() spawns the command independently, allowing systemd to handle the full cycle
 //
 // Prerequisites:
 //   - Linux OS with systemd
-//   - NOPASSWD sudo access configured (install.sh creates /etc/sudoers.d/sub2api)
+//   - Service configured with Restart=always in systemd unit file
 func RestartService() error {
 	if runtime.GOOS != "linux" {
-		return fmt.Errorf("systemd restart only available on Linux")
+		log.Println("Service restart via exit only works on Linux with systemd")
+		return nil
 	}
 
-	log.Println("Initiating service restart...")
+	log.Println("Initiating service restart by graceful exit...")
+	log.Println("systemd will automatically restart the service (Restart=always)")
 
-	// The sub2api user has NOPASSWD sudo access for systemctl commands
+	// Give a moment for logs to flush and response to be sent
-	// (configured by install.sh in /etc/sudoers.d/sub2api).
+	go func() {
-	cmd := exec.Command("sudo", "systemctl", "restart", serviceName)
+		time.Sleep(100 * time.Millisecond)
-	if err := cmd.Start(); err != nil {
+		os.Exit(0)
-		return fmt.Errorf("failed to initiate service restart: %w", err)
+	}()
-	}
 
-	log.Println("Service restart initiated successfully")
 	return nil
 }
 

backend/internal/service/gateway_service.go

@@ -35,25 +35,25 @@ const (
 
 // allowedHeaders 白名单headers（参考CRS项目）
 var allowedHeaders = map[string]bool{
-	"accept":                                  true,
+	"accept":                                    true,
-	"x-stainless-retry-count":                 true,
+	"x-stainless-retry-count":                   true,
-	"x-stainless-timeout":                     true,
+	"x-stainless-timeout":                       true,
-	"x-stainless-lang":                        true,
+	"x-stainless-lang":                          true,
-	"x-stainless-package-version":             true,
+	"x-stainless-package-version":               true,
-	"x-stainless-os":                          true,
+	"x-stainless-os":                            true,
-	"x-stainless-arch":                        true,
+	"x-stainless-arch":                          true,
-	"x-stainless-runtime":                     true,
+	"x-stainless-runtime":                       true,
-	"x-stainless-runtime-version":             true,
+	"x-stainless-runtime-version":               true,
-	"x-stainless-helper-method":               true,
+	"x-stainless-helper-method":                 true,
 	"anthropic-dangerous-direct-browser-access": true,
-	"anthropic-version":                       true,
+	"anthropic-version":                         true,
-	"x-app":                                   true,
+	"x-app":                                     true,
-	"anthropic-beta":                          true,
+	"anthropic-beta":                            true,
-	"accept-language":                         true,
+	"accept-language":                           true,
-	"sec-fetch-mode":                          true,
+	"sec-fetch-mode":                            true,
-	"accept-encoding":                         true,
+	"accept-encoding":                           true,
-	"user-agent":                              true,
+	"user-agent":                                true,
-	"content-type":                            true,
+	"content-type":                              true,
 }
 
 // ClaudeUsage 表示Claude API返回的usage信息
@@ -418,13 +418,19 @@ func (s *GatewayService) Forward(ctx context.Context, c *gin.Context, account *m
 	}
 
 	// 构建上游请求
-	upstreamReq, err := s.buildUpstreamRequest(ctx, c, account, body, token, tokenType)
+	upstreamResult, err := s.buildUpstreamRequest(ctx, c, account, body, token, tokenType)
 	if err != nil {
 		return nil, err
 	}
 
+	// 选择使用的client：如果有代理则使用独立的client，否则使用共享的httpClient
+	httpClient := s.httpClient
+	if upstreamResult.Client != nil {
+		httpClient = upstreamResult.Client
+	}
+
 	// 发送请求
-	resp, err := s.httpClient.Do(upstreamReq)
+	resp, err := httpClient.Do(upstreamResult.Request)
 	if err != nil {
 		return nil, fmt.Errorf("upstream request failed: %w", err)
 	}
@@ -437,11 +443,16 @@ func (s *GatewayService) Forward(ctx context.Context, c *gin.Context, account *m
 		if err != nil {
 			return nil, fmt.Errorf("token refresh failed: %w", err)
 		}
-		upstreamReq, err = s.buildUpstreamRequest(ctx, c, account, body, token, tokenType)
+		upstreamResult, err = s.buildUpstreamRequest(ctx, c, account, body, token, tokenType)
 		if err != nil {
 			return nil, err
 		}
-		resp, err = s.httpClient.Do(upstreamReq)
+		// 重试时也需要使用正确的client
+		httpClient = s.httpClient
+		if upstreamResult.Client != nil {
+			httpClient = upstreamResult.Client
+		}
+		resp, err = httpClient.Do(upstreamResult.Request)
 		if err != nil {
 			return nil, fmt.Errorf("retry request failed: %w", err)
 		}
@@ -480,7 +491,13 @@ func (s *GatewayService) Forward(ctx context.Context, c *gin.Context, account *m
 	}, nil
 }
 
-func (s *GatewayService) buildUpstreamRequest(ctx context.Context, c *gin.Context, account *model.Account, body []byte, token, tokenType string) (*http.Request, error) {
+// buildUpstreamRequestResult contains the request and optional custom client for proxy
+type buildUpstreamRequestResult struct {
+	Request *http.Request
+	Client  *http.Client // nil means use default s.httpClient
+}
+
+func (s *GatewayService) buildUpstreamRequest(ctx context.Context, c *gin.Context, account *model.Account, body []byte, token, tokenType string) (*buildUpstreamRequestResult, error) {
 	// 确定目标URL
 	targetURL := claudeAPIURL
 	if account.Type == model.AccountTypeApiKey {
@@ -549,7 +566,8 @@ func (s *GatewayService) buildUpstreamRequest(ctx context.Context, c *gin.Contex
 		req.Header.Set("anthropic-beta", s.getBetaHeader(body, c.GetHeader("anthropic-beta")))
 	}
 
-	// 配置代理
+	// 配置代理 - 创建独立的client避免并发修改共享httpClient
+	var customClient *http.Client
 	if account.ProxyID != nil && account.Proxy != nil {
 		proxyURL := account.Proxy.URL()
 		if proxyURL != "" {
@@ -566,12 +584,18 @@ func (s *GatewayService) buildUpstreamRequest(ctx context.Context, c *gin.Contex
 					IdleConnTimeout:       90 * time.Second,
 					ResponseHeaderTimeout: responseHeaderTimeout,
 				}
-				s.httpClient.Transport = transport
+				// 创建独立的client，避免并发时修改共享的s.httpClient.Transport
+				customClient = &http.Client{
+					Transport: transport,
+				}
 			}
 		}
 	}
 
-	return req, nil
+	return &buildUpstreamRequestResult{
+		Request: req,
+		Client:  customClient,
+	}, nil
 }
 
 // getBetaHeader 处理anthropic-beta header

deploy/install.sh

@@ -73,9 +73,6 @@ declare -A MSG_ZH=(
     ["dirs_configured"]="目录配置完成"
     ["installing_service"]="正在安装 systemd 服务..."
     ["service_installed"]="systemd 服务已安装"
-    ["setting_up_sudoers"]="正在配置 sudoers..."
-    ["sudoers_configured"]="sudoers 配置完成"
-    ["sudoers_failed"]="sudoers 验证失败，已移除文件"
     ["ready_for_setup"]="准备就绪，可以启动设置向导"
 
     # Completion
@@ -131,6 +128,15 @@ declare -A MSG_ZH=(
     ["server_port_hint"]="建议使用 1024-65535 之间的端口"
     ["server_config_summary"]="服务器配置"
     ["invalid_port"]="无效端口号，请输入 1-65535 之间的数字"
+
+    # Service management
+    ["starting_service"]="正在启动服务..."
+    ["service_started"]="服务已启动"
+    ["service_start_failed"]="服务启动失败，请检查日志"
+    ["enabling_autostart"]="正在设置开机自启..."
+    ["autostart_enabled"]="开机自启已启用"
+    ["getting_public_ip"]="正在获取公网 IP..."
+    ["public_ip_failed"]="无法获取公网 IP，使用本地 IP"
 )
 
 # English strings
@@ -173,9 +179,6 @@ declare -A MSG_EN=(
     ["dirs_configured"]="Directories configured"
     ["installing_service"]="Installing systemd service..."
     ["service_installed"]="Systemd service installed"
-    ["setting_up_sudoers"]="Setting up sudoers..."
-    ["sudoers_configured"]="Sudoers configured"
-    ["sudoers_failed"]="Sudoers validation failed, removing file"
     ["ready_for_setup"]="Ready for Setup Wizard"
 
     # Completion
@@ -231,6 +234,15 @@ declare -A MSG_EN=(
     ["server_port_hint"]="Recommended range: 1024-65535"
     ["server_config_summary"]="Server configuration"
     ["invalid_port"]="Invalid port number, please enter a number between 1-65535"
+
+    # Service management
+    ["starting_service"]="Starting service..."
+    ["service_started"]="Service started"
+    ["service_start_failed"]="Service failed to start, please check logs"
+    ["enabling_autostart"]="Enabling auto-start on boot..."
+    ["autostart_enabled"]="Auto-start enabled"
+    ["getting_public_ip"]="Getting public IP..."
+    ["public_ip_failed"]="Failed to get public IP, using local IP"
 )
 
 # Get message based on current language
@@ -260,9 +272,11 @@ print_error() {
     echo -e "${RED}[$(msg 'error')]${NC} $1"
 }
 
-# Check if running interactively (stdin is a terminal)
+# Check if running interactively (can access terminal)
+# When piped (curl | bash), stdin is not a terminal, but /dev/tty may still be available
 is_interactive() {
-    [ -t 0 ]
+    # Check if /dev/tty is available (works even when piped)
+    [ -e /dev/tty ] && [ -r /dev/tty ] && [ -w /dev/tty ]
 }
 
 # Select language
@@ -282,7 +296,7 @@ select_language() {
     echo "  2) $(msg 'lang_en')"
     echo ""
 
-    read -p "$(msg 'enter_choice'): " lang_input
+    read -p "$(msg 'enter_choice'): " lang_input < /dev/tty
 
     case "$lang_input" in
         2|en|EN|english|English)
@@ -323,7 +337,7 @@ configure_server() {
 
     # Server host
     echo -e "${YELLOW}$(msg 'server_host_hint')${NC}"
-    read -p "$(msg 'server_host_prompt') [${SERVER_HOST}]: " input_host
+    read -p "$(msg 'server_host_prompt') [${SERVER_HOST}]: " input_host < /dev/tty
     if [ -n "$input_host" ]; then
         SERVER_HOST="$input_host"
     fi
@@ -333,7 +347,7 @@ configure_server() {
     # Server port
     echo -e "${YELLOW}$(msg 'server_port_hint')${NC}"
     while true; do
-        read -p "$(msg 'server_port_prompt') [${SERVER_PORT}]: " input_port
+        read -p "$(msg 'server_port_prompt') [${SERVER_PORT}]: " input_port < /dev/tty
         if [ -z "$input_port" ]; then
             # Use default
             break
@@ -483,9 +497,24 @@ download_and_extract() {
 create_user() {
     if id "$SERVICE_USER" &>/dev/null; then
         print_info "$(msg 'user_exists'): $SERVICE_USER"
+        # Fix: Ensure existing user has /bin/sh shell for sudo to work
+        # Previous versions used /bin/false which prevents sudo execution
+        local current_shell
+        current_shell=$(getent passwd "$SERVICE_USER" 2>/dev/null | cut -d: -f7)
+        if [ "$current_shell" = "/bin/false" ] || [ "$current_shell" = "/sbin/nologin" ]; then
+            print_info "Fixing user shell for sudo compatibility..."
+            if usermod -s /bin/sh "$SERVICE_USER" 2>/dev/null; then
+                print_success "User shell updated to /bin/sh"
+            else
+                print_warning "Failed to update user shell. Service restart may not work automatically."
+                print_warning "Manual fix: sudo usermod -s /bin/sh $SERVICE_USER"
+            fi
+        fi
     else
         print_info "$(msg 'creating_user') $SERVICE_USER..."
-        useradd -r -s /bin/false -d "$INSTALL_DIR" "$SERVICE_USER"
+        # Use /bin/sh instead of /bin/false to allow sudo execution
+        # The user still cannot login interactively (no password set)
+        useradd -r -s /bin/sh -d "$INSTALL_DIR" "$SERVICE_USER"
         print_success "$(msg 'user_created')"
     fi
 }
@@ -506,35 +535,6 @@ setup_directories() {
     print_success "$(msg 'dirs_configured')"
 }
 
-# Setup sudoers for service restart
-setup_sudoers() {
-    print_info "$(msg 'setting_up_sudoers')"
-
-    # Check if sudoers file exists in install dir
-    if [ -f "$INSTALL_DIR/sub2api-sudoers" ]; then
-        cp "$INSTALL_DIR/sub2api-sudoers" /etc/sudoers.d/sub2api
-    else
-        # Create sudoers file
-        cat > /etc/sudoers.d/sub2api << 'EOF'
-# Sudoers configuration for Sub2API
-sub2api ALL=(ALL) NOPASSWD: /bin/systemctl restart sub2api
-sub2api ALL=(ALL) NOPASSWD: /bin/systemctl stop sub2api
-sub2api ALL=(ALL) NOPASSWD: /bin/systemctl start sub2api
-EOF
-    fi
-
-    # Set correct permissions (required for sudoers files)
-    chmod 440 /etc/sudoers.d/sub2api
-
-    # Validate sudoers file
-    if visudo -c -f /etc/sudoers.d/sub2api &>/dev/null; then
-        print_success "$(msg 'sudoers_configured')"
-    else
-        print_warning "$(msg 'sudoers_failed')"
-        rm -f /etc/sudoers.d/sub2api
-    fi
-}
-
 # Install systemd service
 install_service() {
     print_info "$(msg 'installing_service')"
@@ -586,13 +586,61 @@ prepare_for_setup() {
     print_success "$(msg 'ready_for_setup')"
 }
 
+# Get public IP address
+get_public_ip() {
+    print_info "$(msg 'getting_public_ip')"
+
+    # Try to get public IP from ipinfo.io
+    local response
+    response=$(curl -s --connect-timeout 5 --max-time 10 "https://ipinfo.io/json" 2>/dev/null)
+
+    if [ -n "$response" ]; then
+        # Extract IP from JSON response using grep and sed (no jq dependency)
+        PUBLIC_IP=$(echo "$response" | grep -o '"ip": *"[^"]*"' | sed 's/"ip": *"\([^"]*\)"/\1/')
+        if [ -n "$PUBLIC_IP" ]; then
+            print_success "Public IP: $PUBLIC_IP"
+            return 0
+        fi
+    fi
+
+    # Fallback to local IP
+    print_warning "$(msg 'public_ip_failed')"
+    PUBLIC_IP=$(hostname -I 2>/dev/null | awk '{print $1}' || echo "YOUR_SERVER_IP")
+    return 1
+}
+
+# Start service
+start_service() {
+    print_info "$(msg 'starting_service')"
+
+    if systemctl start sub2api; then
+        print_success "$(msg 'service_started')"
+        return 0
+    else
+        print_error "$(msg 'service_start_failed')"
+        print_info "sudo journalctl -u sub2api -n 50"
+        return 1
+    fi
+}
+
+# Enable service auto-start
+enable_autostart() {
+    print_info "$(msg 'enabling_autostart')"
+
+    if systemctl enable sub2api 2>/dev/null; then
+        print_success "$(msg 'autostart_enabled')"
+        return 0
+    else
+        print_warning "Failed to enable auto-start"
+        return 1
+    fi
+}
+
 # Print completion message
 print_completion() {
-    local ip_addr
+    # Use PUBLIC_IP which was set by get_public_ip()
-    ip_addr=$(hostname -I 2>/dev/null | awk '{print $1}' || echo "YOUR_SERVER_IP")
-
     # Determine display address
-    local display_host="$ip_addr"
+    local display_host="${PUBLIC_IP:-YOUR_SERVER_IP}"
     if [ "$SERVER_HOST" = "127.0.0.1" ]; then
         display_host="127.0.0.1"
     fi
@@ -606,21 +654,9 @@ print_completion() {
     echo "$(msg 'server_config_summary'): ${SERVER_HOST}:${SERVER_PORT}"
     echo ""
     echo "=============================================="
-    echo "  $(msg 'next_steps')"
+    echo "  $(msg 'step4_open_wizard')"
     echo "=============================================="
     echo ""
-    echo "  1. $(msg 'step1_check_services')"
-    echo "     sudo systemctl status postgresql"
-    echo "     sudo systemctl status redis"
-    echo ""
-    echo "  2. $(msg 'step2_start_service')"
-    echo "     sudo systemctl start sub2api"
-    echo ""
-    echo "  3. $(msg 'step3_enable_autostart')"
-    echo "     sudo systemctl enable sub2api"
-    echo ""
-    echo "  4. $(msg 'step4_open_wizard')"
-    echo ""
     print_info "     http://${display_host}:${SERVER_PORT}"
     echo ""
     echo "     $(msg 'wizard_guide')"
@@ -687,7 +723,7 @@ uninstall() {
             exit 1
         fi
     else
-        read -p "$(msg 'are_you_sure') " -n 1 -r
+        read -p "$(msg 'are_you_sure') " -n 1 -r < /dev/tty
         echo
         if [[ ! $REPLY =~ ^[Yy]$ ]]; then
             print_info "$(msg 'uninstall_cancelled')"
@@ -701,7 +737,6 @@ uninstall() {
 
     print_info "$(msg 'removing_files')"
     rm -f /etc/systemd/system/sub2api.service
-    rm -f /etc/sudoers.d/sub2api
     systemctl daemon-reload
 
     print_info "$(msg 'removing_install_dir')"
@@ -772,8 +807,10 @@ main() {
     create_user
     setup_directories
     install_service
-    setup_sudoers
     prepare_for_setup
+    get_public_ip
+    start_service
+    enable_autostart
     print_completion
 }
 

deploy/sub2api-sudoers

@@ -1,13 +0,0 @@
-# Sudoers configuration for Sub2API
-# This file allows the sub2api service user to restart the service without password
-#
-# Installation:
-#   sudo cp sub2api-sudoers /etc/sudoers.d/sub2api
-#   sudo chmod 440 /etc/sudoers.d/sub2api
-#
-# SECURITY NOTE: This grants limited sudo access only for service management
-
-# Allow sub2api user to restart the service without password
-sub2api ALL=(ALL) NOPASSWD: /bin/systemctl restart sub2api
-sub2api ALL=(ALL) NOPASSWD: /bin/systemctl stop sub2api
-sub2api ALL=(ALL) NOPASSWD: /bin/systemctl start sub2api

frontend/src/main.ts

@@ -9,4 +9,8 @@ const app = createApp(App)
 app.use(createPinia())
 app.use(router)
 app.use(i18n)
-app.mount('#app')
+
+// 等待路由器完成初始导航后再挂载，避免竞态条件导致的空白渲染
+router.isReady().then(() => {
+  app.mount('#app')
+})